What Is Water Softener Loop?

Installing a water softener in our household ensures the essential H2O liquid enters our home contaminant-free. While you’re looking for the requirements to have one, you may encounter that people continuously talk about a water softener loop, but what is it really?

In today’s article, we’ll discuss this particular household attachment, what it is, its purpose, and whether or not it is necessary to have it before the water softener installation.

The Water Softener Loop

The water softener loop is a pipe attachment pre-installed in the household, and you use it to set up your water softener afterward. As you can guess, it is not necessarily a functional piece of equipment, but rather an accessory for a larger machine.

Does every house have a water softener loop? Well, not quite. Some have it, while some others don’t.

Regardless, if you’re dealing with home builders directly, you can always make the request for them to install the loop as they work on the house. Chances are they will offer it either way, so there’s no need to worry about that.

You’re probably wondering if the water softener loop is essential or not. We’ll talk about that next.

Benefits of Having a Water Softener Loop

Now that we know what this loop is, we can go a little deeper by mentioning how having one would benefit your household livelihood.

• Separating the Water Distribution Lines

The amount of activities we do using water is countless. We can use it inside the house for different tasks like cooking, for beverages, and in the shower; For the outside, we use the water for gardening, and wash the vehicles, among others.

Naturally, the water quality varies depending on what you’re doing. While the water for outside activities doesn’t require any conditioning, you can’t say the same for the water you’ll use inside. After all, you’ll need pure water to avoid getting sick.

The water softener and the loop help you separating those two lines. That way, you won’t have to spend a ridiculous amount of money on products to cleanse the water.

• Self-Maintenance

The water softener loop does provide another benefit, which is self-maintaining the purity of the water that comes into your home.

You see, it isn’t uncommon for old pipes to accumulate residual water. Before you notice, you may find yourself using that unsanitary element in your meals or poured in the drinks. The loop prevents that, as it flushes the water in exchange for soft water instead.

So, the water softener loop doesn’t only keep the supply lines clean, but it also clears of any obstruction that may compromise the quality of the water.

Do You Really Need the Pre-Plumbed Water Softener Loop?

While many people consider the loop necessary for the water softener installation, the reality is, you don’t strictly need it. You’ll still be able to install the water softener in your preferred place, more specifically in the garage, without even having the loop in the first place.

The softener will perform equally as good as it would if you had the loop; you’ll get your purified water, and there’s no need to make special accommodations to set the machine either.

If you’re having a professional installing your water softener, they will most likely not charge you more or less regardless of whether or not your house has this loop. That’s also another plus.

So, Where to Install the Water Softener Loop?

To answer this question, we need to figure out where the water supply lines are.

For more convenience and to guarantee proper water flow inside the house, your water softener should be near the water supply lines. This location is also the most suitable to have the loop installed.

Keep in mind that, depending on the architecture of your home, you can find the water supply lines at different places. For instance, if you’re not entirely sure where to look, you may want to check at the garage side. It is the most common, but you can find the lines on different sides.

If the water supply line enters through the garage, then install the water softener device right there. However, if your home receives water from its far side, you can install the water softener outside.

Those locations are the most suitable to have your water softener, and thus, the loop for the said machine. Again, it is not necessary to have the loop, but it doesn’t hurt going the extra mile to have our equipment installed right.

Sounds Cool, But What Does This Water Softening Do?

Since we made a couple of references to soft water or water softening throughout the article, we feel it is necessary to explain this concept a little more in case it wasn’t clear before.

Soft water is incredibly useful for internal plumbing and pipes. It will reduce clogs that often occur inside, and it will get rid of buildups and any nasty residue that lays in there. By doing that process, water flows inside the house under your command, guaranteeing proper supply.

Final Words

The water softener loop is quite helpful. Not only does it provide a secure way to receive water in most households, but it also keeps the pipes clean to avoid clogs. Considering that most home builders offer to install it, you should have no problem to set up a proper loop for your water softener.

To make your life easier, check your current or future household to make sure it has one of these loops. If your home doesn’t have it, you should know that there’s the chance of installing one.

Nonetheless, keep in mind that the loop may not be necessary. People with water softeners often go their whole lives without knowing it existed in the first place, and they still receive their water in good quality either way.

Now you know pretty much everything you need to know about the water softener loop. Next time someone brings the topic up, you’ll know all the details.